Kit Acrygel Base

Use:

• Prepare the natural nail opacizzandola with the buffer and white.
• Apply on the nail bed, a layer of Nail Prep and allow to dry in air for 60" (optional)
• Apply the Primer and let it dry in the air for 60".
• Choose the form with the correct size for each nail.
• Take a quantity of Acrygel with the help of the spatula and insert it in the mould.
• Roll it out with the special brush soaked in a Solution Acrygel Modelling coming to the desired length.
• Flip the Dual Form, and place it on the nail, pressing from top to bottom, until all the bubbles disappear.
• Remove the excess product on the edges of the form with the help of a brush soaked in a Solution Shaping and spread it out even in the part under the nail.
• Polymerize in UV lamp 240 seconds (4 min) and LED lamp in 90 seconds.
• Remove the Dual Form by applying a slight pressure on the edges of the tip towards the inside and lift it gently.
• Adjust the length of the nail and choose the shape you want with the file.
• Remove the residues with a special brush and then degrease with Nail Cleaner (only if you file because it has no dispersion)
• Apply a layer of Finish and let it catalyze in the lamp, then degrease.

NOTE: If you want to apply the color, do it after the degreasing of the Acrygel and close with the finish (except if you apply a gel Polish Peel Off). For the removal and refil is to be treated as if it were gel.